Skip to Main Content

Burton Racing COIL ON PLUG KIT (Acura/Honda)

Burton Racing
This item requires Vehicle Fitment, please select Vehicle first!
OR if you know the Part Number you need, select from Options below.
Part #:BR-COPK
Availability:In Stock
Regular Price: $523.69
On Sale For: $479.99
Free Shipping over $400

We have successfully used this kit on cars and chassis in the Honda/Acura family years ranging 1988-2001 with common engines such as B16, B18, B20, D15, D16, F20, F22, F23, H22, H23, etc...

This setup is the least invasive to install and 100% reversible without requiring any cutting or splicing necessary. This product does require soldering into the ECU. If you'd like to send us your ECU for the installation, we will do all of the soldering for you. Simply select "yes" for Install and you will receive a confirmation email with further instructions on where to send your ECU.


No other hardware or software required! Compatible with a completely stock OBD1 ecu or with common tuning software's available today such as Hondata, Crome, Neptune, ECTune, BMTune, etc.. as well as the RTP devices like Hondata S300 and Moates Demon boards.

Just like common setups on the market today you will be able to remove the Coil, Igniter (ICM), and rotor from the distributor to install a low profile distributor cap and bypassing those components common to failure!

It requires a USDM OBD1 ecu equipped with an FC1 knock board slot such as P06, P28, P30, P61, P72, and P75. On ecu's already equipped with a knock board it will require removal, please note stock knock sensors are highly unlikely to be utilized under any type of after market tuning situations and deemed unnecessary. They are easily removed and/or disabled inside the tuning parameters.

Like all Coil on Plug systems you are REQUIRED to run resistor type spark plugs. If you are unsure of your plug choice please contact your parts supplier or cross reference the part numbers online. We highly recommend using the NGK BKR series of spark plugs for Honda and Acura applications.

This kit is available as a partial unit as you see here with the COP conversion board, harness, and install hardware with stickers and instructions included.

We also offer a full kit for someone looking for K20 or D17 coil packs with their purchase. Both of these are brand new aftermarket coil pack units sourced directly from the manufacturer and supplied in a set of four (4).

There currently is a wide range of coil mounting hardware or techniques. Most applications for VTEC DOHC engines are utilizing K20 coils and SOHC engines mainly use D17 coil packs. This is directly up to the user in most cases on which route they will choose, please email us for any specific regards on mounting.

This product is for OFF-ROAD use ONLY. We do not offer any tuning support for this product and any hardware or software changes need to be performed by a professional.

Burton Racing COIL ON PLUG KIT (Acura/Honda) fits the following vehicle(s):

  • 1990 Acura Integra
  • 1991 Acura Integra
  • 1992 Acura Integra
  • 1993 Acura Integra
  • 1994 Acura Integra
  • 1995 Acura Integra
  • 1996 Acura Integra
  • 1997 Acura Integra
  • 1998 Acura Integra
  • 1999 Acura Integra
  • 2000 Acura Integra
  • 2001 Acura Integra
  • 1988 Honda Civic
  • 1989 Honda Civic
  • 1990 Honda Civic
  • 1991 Honda Civic
  • 1992 Honda Civic
  • 1993 Honda Civic
  • 1994 Honda Civic
  • 1995 Honda Civic
  • 1996 Honda Civic
  • 1997 Honda Civic
  • 1998 Honda Civic
  • 1999 Honda Civic
  • 2000 Honda Civic
  • 1993 Honda Prelude
  • 1994 Honda Prelude
  • 1995 Honda Prelude
  • 1996 Honda Prelude
  • 1997 Honda Prelude
  • 1998 Honda Prelude
  • 1999 Honda Prelude
  • 2000 Honda Prelude
  • 2001 Honda Prelude
  • 2002 Honda Prelude